Lazer Pro
FAQ's about the Rad Lazer Pro.
How do I power on/off the Rad Lazer Pro?
To power on the Lazer Pro, press and hold the power button below the eyepiece until the red lights on the front flash twice, then press the Distance button to activate the viewfinder display. To power it off, press and hold the power button again unt
Why is my viewfinder blank?
After powering on your device, the viewfinder will be blank until you press the Distance button once (the button with the flag icon on it).
Why does the viewfinder display look blurry?
If the display appears blurry, adjust the eyepiece by turning it left or right until it becomes clear.
How do I register and connect my Lazer Pro to the Rad app?
1. Download the Rad mobile app and enable Bluetooth® on your phone. 2. In the app, scroll down to “Lazer Pro” and select "Register & Connect Device". 3. Press the red “Connect” button. 4. Once the app says your device is connected, press "Finish."
Why isn’t my Lazer Pro connecting to the app?
The Lazer Pro will stop searching for a Bluetooth connection if one isn’t made within 15 minutes. If you left your Lazer Pro powered on for a bit before connecting it to the app, this might be preventing you from connecting. To restart Bluetooth scan
Can the Lazer Pro be used without the Rad mobile app?
Yes. The Lazer Pro can be used without the app to view GPS distances across 42,000+ preloaded courses. Once you’ve registered your Lazer Pro to your account, the rangefinder’s built in cellular connectivity also lets you play and save rounds to your
What additional features does the Lazer Pro have when connected with the Rad mobile app?
For cellular round data to save to your account, you need to register and connect your Lazer Pro to the app. Once registered, the rangefinder can be used while disconnected from Bluetooth to play cellular rounds. From the Rad app, you can view and ma
How can I tell if my Lazer Pro is connected to the app?
If you look into the eyepiece, there is a blinking Bluetooth icon at the top viewfinder beside the battery indicator. When you connect to the app, the icon will stop blinking.
How do I start a cellular round on my Lazer Pro?
In order to play a cellular round, you first need to register your rangefinder to your account in the app. To start a cellular round, follow these steps:. 1. Disable Bluetooth on your phone. The Lazer Pro won’t search for cellular if it connects to B
How do I end a cellular round on the Lazer Pro?
Powering off the Lazer Pro will end your cellular round and save the round with any shot data to your account in the Rad app. You will receive a notification from the app on your phone letting you know that your round was saved.
How do I play a round with my Lazer Pro connected to the app?
Once you have connected your Lazer Pro to the app, find it on the device list, press the “Play Golf” button, then select your course and tee box. Next, you will need to wait for the rangefinder to get a GPS fix. The Lazer Pro will automatically begin
Why is my Lazer Pro taking so long to get a GPS fix?
If your Lazer Pro is taking a while to get a GPS fix, make sure you are outside standing still with no obstructions above you. If it still isn’t connecting, power off the Lazer Pro then power it back on.
How do I measure the distance to the pin?
Aim the Lazer Pro at the pin and press the Distance button. The rangefinder will pulse and the measured distance to the target will display in the viewfinder.
How do I track shots with my Lazer Pro?
While playing a cellular round or a round connected to the app, your shots are automatically tracked each time you press the Distance button. Shot tracking can be enabled/disabled from the Lazer Pro settings in the app.
How do I view my tracked shots?
You can view your tracked shots from the Rad app in the Shot Summary after your round.
How do I delete a shot?
While it is not possible to delete a shot while playing a round, you can delete any shot from the Shot Summary screen displayed at the end of your round in the Rad app. Press the X by a shot to remove it, then press “Save” to apply changes.
What is advanced pin lock and how do I activate it?
Advanced pin lock ensures that the rangefinder doesn’t lock onto an object outside the perimeter of the green. To activate advanced pin lock, aim the Lazer Pro at the pin and press and hold the Distance button (the one with the flag icon on it) to st
Why isn’t advanced pin lock working?
Advanced pin lock will only work if the Lazer Pro is on the correct hole. Look at the hole number at the bottom of the viewfinder and make sure it matches the hole you are on. If it doesn’t, manually advance the Lazer Pro to the correct hole.
How do I manually advance to the next hole?
Your Lazer Pro will automatically advance to the next hole as you play, but if you wish to manually change holes, press both the Distance and Mode Menu buttons on the top of the Lazer Pro at the same time to advance to the next hole in sequence.
How does the “Locate" feature work in the Rad mobile app for the Lazer Pro?
For cellular rounds, the last known location will be saved to the app even while disconnected from the app. To see this location, open the app and press “Device Menu” for the Lazer Pro then press “Locate.” Please note the last known location is only
How do I change the settings on my Lazer Pro?
Changing settings from the app:. 1. Connect the rangefinder to the app. 2. Press “Device Menu” then “Settings.”. 3. Adjust the desired settings or select a mode preset. 4. Scroll down and press “Save.”. Changing settings from the Lazer Pro:. 1. Hold
How do I update the firmware on my Lazer Pro?
With cellular, firmware updates are installed automatically. However, if you want to manually update the firmware, follow these steps:. 1. With your Lazer Pro connected to Bluetooth, find it on the device list in the app and press "Device Menu.”. 2.
My Lazer Pro isn’t connecting to the app anymore. What should I do?
If your Lazer Pro isn’t reconnecting to the app, try following these steps to reset the connection:. 1. Power off your Lazer Pro and go to your phone’s Bluetooth settings. 2. Press the “i” icon (iOS) or the gear icon (Android) beside “Rad Lazer Pro”
Why are the displayed distances on the Lazer Pro off by 10 yards?
Check the Units setting in the app or on your Lazer Pro and make sure it is set to your preferred unit of measurement (yards or meters). To change this from the device itself, look into the viewfinder then press and hold the Mode Menu button (the one
Why isn’t my Lazer Pro powering on?
With an active cell plan, the Lazer Pro automatically downloads firmware updates which are installed the next time the rangefinder is powered on. If the power button doesn’t seem to be responding or if it looks like the Lazer Pro powered on then imme